LUMINES GENESIS Magnetic linear lamp LINEAR 48 V 15 W SMART white

   

LUMINES GENESIS SMART lamps allow for smooth adjustment of the color temperature of light in the range of 3000 K – 6500 K and change of light intensity.

Control is performed using a mobile application or radio remote control, ensuring convenient and intuitive light control in any space.

The control system allows the lighting installation to be divided into 4 independent zones, with the possibility of assigning any number of luminaires to each of them.

Bluetooth control using the Tuya app provides direct communication with the lighting without the need for additional gateways or control centers, and mesh technology enables signal transmission between devices, increasing the range and stability of operation in complex installations.

LUMINES GENESIS SMART lamps and spotlights are also compatible with the RF (Radio Frequency) remote control (37-0140-30).

The GENESIS magnetic track series is a modern and flexible lighting solution that combines the functionality of a linear system with intelligent control.

The GENESIS magnetic track series – modern and functional lighting.

LUMINES GENESIS is a 48 V low-voltage magnetic track system.

LUMINES GENESIS lamps and spotlights are the main component of the lighting system based on 48 V GENESIS magnetic tracks. The maximum number of luminaires that can be installed depends on the maximum load of the power supply unit selected for the installation (power supply units available in 100/150/250 W options).

The wide range of configuration options and precise adaptation to specific needs make track lighting suitable for use in many commercial and private spaces:
– commercial and public spaces,
– museums,
– shops,
– office spaces,
– hair salons,
– houses, apartments.

Cross-section

Product application

Category
Magnetic track, Track Lights

Product specifications

IP
IP20
CRI Ra
≥ 90
On/off cycles
10000
Voltage
48 V DC
Working temperature
-20 °C +45 °C
CCT
3000 - 6500 K
Total luminous flux
640 lm
Housing material
Aluminium
SDCM
≤ 3
CCT control type
SMART CCT
Power
15 W
Beam angle
110°
Index
37-0134-10

Installation diagrams

Surface mounting requires the use of the GENESIS magnetic busbar in the surface-mounted version, mounted to the ceiling or wall with mounting screws.

Suspended installation requires the use of GENESIS magnetic busbar in the surface-mounted version and a set of slings, mounted in the mounting channel built into the busbar.

Recessed installation requires the use of the recessed version of the GENESIS magnetic busbar. The busbar is installed between two drywall panels using mounting screws. It does not require additional plastering.

Where to buy?

Check the list of our partners to find the nearest dealership

Do you have any questions?

Please contact us using the contact form.





    Storage