Home » Products » LUMINES A Surface LED Profile

LUMINES A Surface LED Profile

An LED profile designed for surface mounting with a wide range of applications. It is ideally suited for use as a decorative lighting element in furniture and interior finishes, as well as for suspended installations in architectural interiors.

Get information

Configure in 3D

Data sheet

Remove from storage Add to storage

Bending table

Declaration of Conformity CE

Declaration of Conformity UKCA

Assembly technique

Cross section

Product application

System

Installation method

Surface, Suspended

Category

LED profiles, General

Product specifications

Flux direction

Perpendicular

Shape

Rectangular

For sealing

Yes - IP68, No - IP20

For bending

Horizontal, Vertical

To Assembly

Decorative lighting

Connection option

Drive over option

Not

Power supply position

Outside the profile

Glare rating – UGR

Basic

Table of minimum bending radii

Type of bending	Lighting direction	FLEX cover	PMMA/PC cover
horizontal (transverse)	down	300	—
vertical	inward	200	200
vertical	outward	150	325

Minimum bending radius (mm) for the given cover.
Tolerance: +/- 5%. Bent profiles are available only in a lacquered finish.

Colors

Profile

1.0 m

2.02 m

3.0 m

Custom size up to 6 m

White

/ lacquered /

1.0 m: 10-0011-10

2.02 m: 10-0011-20

3.0 m: 10-0011-30

Custom size up to 6 m: For orders

Black

/ anodized /

1.0 m: 10-0012-10

2.02 m: 10-0012-20

3.0 m: 10-0012-30

Custom size up to 6 m: For orders

INOX

/ anodized /

1.0 m: 10-0013-10

2.02 m: 10-0013-20

3.0 m: 10-0013-30

Custom size up to 6 m: For orders

Silver

/ anodized /

1.0 m: 10-0014-10

2.02 m: 10-0014-20

3.0 m: 10-0014-30

Custom size up to 6 m: For orders

Raw

1.0 m: 10-0010-10

2.02 m: 10-0010-20

3.0 m: 10-00-10-30

Custom size up to 6 m: For orders

Golden

/ lacquered /

1.0 m: 10-1666-10

2.02 m: 10-1666-20

3.0 m: 10-1666-30

Custom size up to 6 m: For orders

Installation diagrams

Assembly scheme for elements of the lighting system using a profile A and (1) a BASIC cover, (2) a LED strip, (3) an end cap with hole, (3a) an end cap without hole, (4) a mounting screw, (5) a MINI mounting clip for profile A

Assembly scheme for elements of the lighting system using a profile A and (1) a HIGH cover, (2) a LED strip, (3) an end cap with hole, (3a) an end cap without hole, (4) a mounting screw, (5) a mounting clip High for profile A

A BASIC end caps

A HIGH end caps

Installation manual for A profile with BASIC cover, (1) with double-sided tape, (2) with a mounting clip for A, (3) with A MINI mounting clip, (4) with metal mounting clip A

The result of installation of profile A with BASIC cover, (1) with double-sided tape, (2) with a mounting clip for A, (3) with A MINI mounting clip, (4) with metal mounting clip for A